Rock under the topsoil
A post hole in the hills often reaches rock well short of 36 inches. Stopping there leaves a short post that the next freeze or wind will loosen, so we cut into the rock until the hole is full depth.
A Bonner Springs fence line rarely runs flat or straight. It climbs a slope, runs through trees, and often hits rock on the way down. We step or rack the run to fit the ground, and every post still reaches 36 inches in concrete, rock or not. Staining is done in-house. 4.9★ from 85 Google reviews.
The short answer
Fence installation in Bonner Springs is mostly a terrain job. Yards in the hills above the Kansas River slope, run into timber, and often have rock under the topsoil. We step or rack each run to the ground, cut through rock to reach 36 inches, and pick materials that suit a hillside.
RKC installs and repairs every type of fence — wood, vinyl, chain link, ornamental iron, aluminum, and commercial security — plus gates, automatic openers, and in-house staining. This is the Bonner Springs hub; for the company as a whole, see our Olathe fence company overview.
The ground you’re fencing
Bonner Springs sits in rolling hills on the edge of the Kansas River valley, and most yards carry at least one of three complications. None of them makes a good fence impossible. They just change how it has to be built, and they’re the reason a quote here should come from someone who has walked your lot.
A post hole in the hills often reaches rock well short of 36 inches. Stopping there leaves a short post that the next freeze or wind will loosen, so we cut into the rock until the hole is full depth.
Many lots fall away from the house, sometimes in two directions. Each section has to be stepped or racked to that grade, and the bottom of the fence has to stay close enough to the ground to keep a pet in.
Wooded lots mean roots where a post wants to go and limbs that can come down on a fence. We shift post spacing around big roots and talk through which trees overhang the line before we build.

Vinyl
Staining a long wood fence that climbs a hill is nobody’s idea of a weekend, which is why vinyl has a real following in Bonner Springs. It never needs a coat of anything. The catch is that vinyl panels don’t bend to follow a slope well; on steep ground they step down, and each step leaves a triangle of open space at the bottom. On a gentle grade that’s minor. On a steep one we’ll show you where the gaps fall before you choose it.
Bonner Springs vinyl fence details
Chain link
No fence follows uneven ground better than chain link. The fabric flexes over dips and rises, so a dog run through the trees or a line down into the valley stays tight to the ground the whole way. That and its low cost per foot make it common on the bigger, rougher Bonner Springs lots. Some newer hilltop subdivisions don’t want it, so we check covenants first, and black vinyl coating helps it disappear into a wooded backdrop.
Bonner Springs chain link fence details
Wood & cedar
Cedar handles a slope more gracefully than most materials because each picket can be cut to the ground beneath it. That covers everything from a plain dog-ear run to the horizontal slat fence we built around a sloped Bonner Springs backyard earlier this year, where the boards had to stay level so the fence stepped down in sections. On hillside lots we leave a kickboard at the bottom so runoff hits replaceable wood instead of the pickets.
Bonner Springs wood fence details
Privacy
On a hill, privacy depends on where the fence sits as much as how tall it is. A six-foot fence at the bottom of your slope may barely screen the neighbor uphill, while the same fence along the top of the yard can block the whole view. So we walk the sight lines with you first, standing where you sit outside, and then place the run. Stepped panels keep the top line level and read as a finished fence from both yards.
Bonner Springs privacy fence details
Commercial
Bonner Springs commercial fencing clusters in two places: the industrial and distribution sites around the I-70 and K-7 interchange, and properties that deal with event traffic from the Azura Amphitheater. The first want a secure perimeter and a gate that works for trucks; the second want to keep cars and foot traffic where they belong on a show night. We build to commercial gauge and include the COI and W-9 with the proposal.
Bonner Springs commercial fence details
Aluminum
Aluminum suits a wooded Bonner Springs lot where you want to keep the view into the trees. Rackable panels lean with a moderate slope instead of stepping, so the bottom rail stays close to the ground, and the metal shrugs off the damp leaf litter that rots wood along a tree line. On steeper ground we step it and set the posts into rock where we have to.
Bonner Springs aluminum fence details
Pool
A pool on a hilly lot usually sits on a cut-and-filled level pad, with the yard falling away around it, so the fence has to hold its height and keep a tight bottom where the ground drops. Gates need to swing and close on their own without dragging on the grade. We confirm the current barrier requirements with the city, and your association if there is one, before building.
Bonner Springs pool fence details
Ornamental iron
Bonner Springs is one of the older towns in Kansas, and welded iron belongs on some of the older houses on the streets around downtown, where a lighter aluminum fence can look out of place. It’s also the material for a heavy drive gate on a long, sloped driveway. Steel needs protection where it meets wet ground, so we use an E-coat under the powder coat.
Bonner Springs ornamental iron detailsHave a fence that needs work instead? We handle fence repair, staining and sealing, and gate installation in Bonner Springs too. If a homes association reviews your plans, see HOA-approved fencing in Bonner Springs.
Runoff on a slope
On a hillside, every hard rain sends water down along the fence line, and it takes a little soil with it each time. After a few seasons the gap under the bottom rail is big enough for a dog to get through, and the posts on the downhill side have less ground holding them. It’s one of the most common problems we see on sloped Bonner Springs lots, and the fence usually isn’t the cause; it just sits in the path of the water.
We build for it from the start. On wood fences a kickboard runs along the bottom, cut to the grade and set slightly into the soil, so runoff hits a board that’s cheap to replace. Posts get gravel at the base so water drains away from the footing instead of pooling. Where the wash is worst, a short buried barrier stops digging and slows erosion. If a downspout or a neighbor’s yard is sending water your way, we’ll point it out, because fixing that does more than any fence detail.
Already have a fence with a washed-out bottom? That’s usually a repair, not a replacement, as long as the posts are still sound.
Where your lot sits
Bonner Springs covers ground from the low land along the Kansas River to wooded hills and newer subdivisions on the ridges. Here’s the general pattern for each. Your own lot decides, and we look at it in person before we quote.
| Part of town | The ground | Fence that tends to fit | What we watch for |
|---|---|---|---|
| Newer hilltop subdivisions | Graded lots, often over rock | Cedar privacy, stepped | Rock at depth; association guidelines |
| Hillside back yards | Steady slope, runoff downhill | Stepped cedar, or chain link and aluminum that follow the grade | Soil washing out under the bottom of the fence |
| Low ground toward the Kansas River | Flatter, wetter, slower to drain | Chain link or vinyl | Drainage at the posts; whether floodplain requirements apply |
| Wooded lots west into the hills | Timber, roots, leaf litter | Chain link or split rail, cedar near the house | Setting posts around roots; limbs over the line |
| Older streets near downtown | Smaller, often irregular lots | Picket, cedar, or iron | Finding the true line; removing the old fence |
Growth is mostly heading south toward Shawnee and west into the hills. Around town you’ll find us near the Azura Amphitheater, the National Agricultural Center, and Moon Marble, and on K-7, I-70, US-24/40, and Nettleton Avenue.
Recent work
In February 2026 we built a horizontal slat cedar fence around a sloped backyard in Bonner Springs. Horizontal boards have to stay level to look right, so on that falling ground the fence steps down in sections, and every post went 36 inches into concrete so the gaps between boards stay even. The write-up has before-and-after video.




The photos above are a sample of RKC’s work around Bonner Springs and the wider metro.
Bonner Springs fence pricing
Sometimes, and when they do, you’ll see exactly where. Our per-foot rates are the same across the metro. On a Bonner Springs lot, what can add to them is cutting through rock to reach full depth, extra posts and labor on steep stepped sections, clearing brush or working around trees, and hauling away an old fence. Each one is its own line on the estimate. Plenty of owners save by running chain link or split rail on the far edge of a big lot and keeping cedar close to the house.
The estimate is free and written out line by line, including any rock or slope work.
Bonner Springs fence questions
What Bonner Springs owners most often ask when we walk the property. For anything else, call Josh, the owner, at (913) 286-1091.
REVIEWS
4.9 ★ · 85 Google reviews
Every review is on our Google Business Profile — read them there, unedited.
Read all 85 reviews on GoogleService area
We also build in Edwardsville just east along the river, Basehor to the north, and Shawnee across the river to the south, where western lots bring some of the same slope work. For the rest of the metro, start from our Olathe fence company overview.
Free and on site. We walk the slope with you, check for rock and runoff, and put it all in a written quote.
Ready when you are
Get a free estimate — we usually respond the same day.