Skip to content
Wood, Vinyl & Iron Fence Installation — Mission, KS

Wood, Vinyl & Iron Fence Installation — Mission, KS

Need a fence in Mission? RKC Wood Care Pros replaces aging chain link and installs cedar privacy, vinyl, and more for homes across the city — threading a straight, lasting fence onto tight, tree-shaded, half-fenced older lots. Same crew builds it and stains it, one company from the first post to the final coat. 4.9 stars from 85 Google reviews. Free estimate.

★★★★★
4.9
from 85 reviews
Licensed
& Insured · KS + MO
400+
fences installed
A+ BBB Rated Licensed KS + MO Owner Walks Every Install Free On-Site Estimates
See every style we install ↓

WHY MISSION HOMEOWNERS HIRE US

Why Mission Homeowners Hire an Olathe-Based Fence Installation Contractor

Mission is a short drive northeast of our Olathe home base. We know Mission's dense older-home layouts, mature-tree root systems, and half-fenced property lines well enough that the job goes in clean the first time. Mission doesn't need a contractor who chases subdivision paperwork — it needs one who can thread a straight, lasting fence onto a tight, root-bound 1950s lot against a line that's already half-fenced.

1

Mature-tree root negotiation on every dig

Mission's tree canopy is an asset above ground and a challenge below. We bring reciprocating saws and root-cutting tools to every Mission install, nudge post positions within the run to preserve structural roots, and flag anything that changes the estimate before digging. No surprise change orders.

2

'Mixed-fence' installs done cleanly

Many Mission yards have cedar on one side and a neighbor's old chain link on the other. We install new fencing on your side cleanly, tying into existing corner posts where appropriate. You're not charged for perimeter that's already fenced. Pricing reflects exactly what we install.

3

Creative materials, built to structural spec

Horizontal slats, corrugated metal, mixed wood-and-steel — Mission's eclectic, individually-built older homes invite designs you rarely see on a newer suburban block. We've built enough of them to know how to make the look work structurally: 36-inch post depth, wind-rated panels, so the design lasts as long as the idea.

4

Same crew for install AND staining

Most Mission fence contractors hand you off to a separate stain company 30 days later. We don't. The crew that sets the posts comes back with the stain. One company, one set of standards, one phone number for warranty follow-up.

THE MISSION LOT READ

On a Mission Lot, the Fence Job Is Decided at the Property Line

You're rarely fencing a blank lot in Mission — you're threading a new fence into an old, dense, half-fenced one. Pre-1970 homes on 0.10-to-0.20-acre lots, a mature oak-and-elm canopy overhead, and a property line that's been patched and drifted for decades. Six situations we read on nearly every Mission install — and the build call each one forces.

Mixed fence line

Your cedar on one side, the neighbor's old chain link on the other — the norm on a Mission block.

We set our own posts just inside your line and tie in cleanly at the corners. You pay for the sides that are yours, not the whole perimeter.

Fence-line creep

Decades of DIY patches have drifted the old line off where the deed actually puts it.

We re-establish the true line off the pins before digging — not off the last rotted post — so the new run lands where it belongs.

Mature-tree roots

Oak, maple, and elm root systems tangle the post holes across Mission's shaded lots.

Reciprocating saws and root cutters on every dig; a post nudged within the run to save a structural root, flagged on the estimate first — no surprise change order.

Shade-damp soil

The canopy keeps the ground wet long after rain, and wet clay rots a post at the ground line first.

Drainage gravel at every post base under a 36-inch bell-bottom footing, so water moves away from the wood instead of sitting against it.

Drainage pocket

Narrow gaps between close lots collect water in low spots the open suburbs never see.

Footings crowned to shed water and the run stepped through the low spot, so the pocket can't heave the line over a wet winter.

Tight gate clearance

A 40-foot-wide backyard with the gate landing a step off the public sidewalk.

Gate hung to swing into the yard on the deeper hinge post, so the walk clears the sidewalk with room to reach the latch.

WHAT WE INSTALL IN MISSION

Every Fence Installation Service Available Across Mission

Privacy cedar, vinyl, chain link repair/replacement, ornamental iron, and mixed-material installs — plus gates and in-house staining. Every Mission fence installation service below links to a dedicated page with Mission-specific details.

Wood Fence Installation in Mission, KS by RKC Wood Care Pros

Wood Fence Installation

6-foot cedar privacy replacing the 4-foot chain link that came with Mission's older rentals and starter homes — the standard upgrade across Countryside and Milhaven, set on 36-inch posts.

Mission details
Privacy Fence Installation in Mission, KS by RKC Wood Care Pros

Privacy Fence Installation

Full-height cedar for Mission's 0.10–0.20-acre lots where the neighbor's window is 40 feet off — privacy, not pet range, is the reason most Mission homeowners call.

Mission details
Vinyl Fence Installation in Mission, KS by RKC Wood Care Pros

Vinyl Fence Installation

White, tan, and gray vinyl — the high-end pick for Mission homeowners done staining cedar every few years on a tight, tree-shaded lot.

Mission details
Chain Link Fencing in Mission, KS by RKC Wood Care Pros

Chain Link Fencing

Mission carries one of Johnson County's heaviest legacy chain-link concentrations — we repair and replace far more than we install new. New runs go in galvanized or vinyl-coated for the longest lifespan.

Mission details
Fence Repair in Mission, KS by RKC Wood Care Pros

Fence Repair

Post rot from mature-tree shade is Mission's #1 repair call — the dense canopy keeps soil damp longer than the open suburbs. We pull the post, add drainage gravel, and re-set to 36 inches.

Mission details
Gate Installation in Mission, KS by RKC Wood Care Pros

Gate Installation

Walk, privacy, and side-yard gates built for Mission's tight clearances — most hang to swing inward because the public sidewalk sits too close to swing out.

Mission details
Staining & Sealing in Mission, KS by RKC Wood Care Pros

Staining & Sealing

Semi-transparent penetrating stain applied by the same crew that set the posts — your color, your finish, no waiting on a second company to show up 30 days later.

Mission details

Also serving Mission across the metro: Aluminum fencing · Ornamental iron · Pool fencing · Commercial fencing · HOA-compliant fencing. Aluminum, iron, pool, and commercial work runs off our metro crews out of Olathe.

MISSION NEIGHBORHOODS

Fence Installations Across Every Mission Neighborhood

From Countryside's chain-link-to-cedar upgrades to Milhaven's creative privacy designs, every Mission neighborhood has its own texture. Here's what we see across Mission's residential areas and how fence installation in Mission varies block to block.

Countryside

Dense, tight-lot Mission neighborhood of pre-1970 ranch homes. Tall mature trees throw heavy shade that keeps soil damp — post-rot repair is common here. Cedar privacy replacing the original 4-foot chain link drives most new installs.

Milhaven

Walkable, tree-lined, and close to downtown Mission. Many yards back onto neighbors at 25 to 30 feet — privacy fencing is the priority here, not pet range. Creative, individual layouts are common on these older, eclectic lots.

Mission Hill Acres

Established Mission neighborhood with a mix of cedar and chain link of varying ages. 'Mixed-fence' installs are common — we replace the one or two sides that are yours while tying into the existing neighbor fence cleanly. Privacy from street noise and pedestrian traffic is a major driver here.

Highland Crest

Mid-sized Mission residential area where 1940s-50s housing stock has been gentrified over the past decade. Younger homeowners often upgrade fencing during a broader yard renovation — cedar privacy with modern gate hardware is the common spec.

Beverly Hills

Smaller section of Mission with older established homes and mature landscaping. Post rot from shade and older-fence replacement are the typical calls. Material and style are fully the homeowner's choice.

Near Johnson Drive

Older homes near the Johnson Drive commercial corridor. Lot sizes are modest, and privacy from nearby foot traffic and street noise motivates most installs. We run 6-foot cedar privacy routinely here, often with a semi-transparent stain to match the block.

Landmarks near our Mission service areas: Mission Gateway (the old Mission Mall site), the Sylvester Powell Jr. Community Center and its pool with the big slide, Broadmoor Park, the Johnson County Northeast Offices, and Peppermint Park. Our crews travel Shawnee Mission Parkway, Johnson Drive, Metcalf Avenue, and I-35 from our Olathe home base — if you're near any of them, we're a short drive.

MISSION FENCE PRICING

What Does Fence Installation Cost in Mission?

RKC's pricing for the KC metro is consistent regardless of which city the project is in — labor and material costs don't vary significantly across the communities we serve. What affects your specific Mission quote is linear footage, gate count, old-fence demo and haul-off, and how much of the line is already fenced — on a mixed-fence lot you only pay for the sides that are yours.

Installed price per linear foot · 6-ft privacy
Cedar Privacy (board-on-board) $22–$35/LF Most-requested install in KC
Cedar Shadow Box $28–$38/LF Both sides finished · faces both yards
Pressure-Treated Pine $18–$28/LF Budget option · 90-day stain wait
UV-Stabilized Vinyl $28–$45/LF Zero staining · aluminum-reinforced
Chain Link (galvanized) $10–$18/LF Repair, replace, or new utility runs
Ornamental Aluminum $25–$45/LF Decorative · pet range · pool-safe

Every estimate is free, written, and itemized — posts, concrete, hardware, and cleanup on separate line items. No surprises at invoice. Old-fence demo and haul-off is an add-on line if you need it.

See full KC pricing FAQ →

MISSION FEEDBACK

What Mission Homeowners Say About Working With RKC

We've installed across Mission — chain link replacements, creative horizontal slat designs, mixed-fence projects. Specific Mission-address reviews are being collected now. In the meantime, the full 85 Google reviews from across the KC metro give you the clearest picture of how our installs hold up.

MISSION FENCE QUESTIONS

Fence Installation Questions Mission Homeowners Ask Most

Common questions Mission homeowners call about most often. If yours isn't here, call (913) 286-1091 — Josh usually picks up.

Walnut-stained cedar privacy fence in a Mission, Kansas backyard by RKC Wood Care Pros

Soil & Installation

Why does Mission's soil matter for fence installation?
Mission sits on the same Johnson County clay as the rest of the metro, but with an added complication: heavy shade from mature trees. The clay holds water under the canopy longer than in open suburbs, which accelerates post rot at the ground line. Our standard: 36-inch post depth with bell-bottom poured concrete and drainage gravel at the base. The drainage gravel makes a bigger difference in Mission than in wide-open Gardner because the soil stays wetter longer.
Why is post rot so common in Mission fences?
Three reasons. First, mature-tree canopy keeps soil shaded and damp. Second, decades of DIY repairs over 50+ year-old fences often didn't include drainage gravel or proper concrete footings. Third, narrow side yards between close neighbor homes create poor airflow, so fences dry slowly after rain. Our solution: drainage gravel at every post base, wet-poured concrete bell-bottom footing, and replacing the post at 36 inches — not splinting the rotten original.
Are tree roots a problem on Mission fence installs?
Yes, regularly. Mission's mature-tree neighborhoods have extensive root systems that tangle post holes and sometimes require root cutting during the dig. We carry reciprocating saws and root-cutting tools on every Mission install. When a root is too structural to cut, we nudge the post position within the run and flag it on the estimate so there's no surprise.
How do you handle 'mixed-fence' Mission installs?
A Mission specialty. Many Mission yards have cedar on one side (installed by you) and the neighbor's old chain link on the other side. We install the new fence on your side cleanly, tying into the existing corner posts where appropriate and setting our own where not. We don't touch the neighbor's fence unless they've also contracted separately. Mixed layouts are priced by the section we actually install, not the total yard perimeter.

Mission Neighborhoods

What's the most common fence style in Countryside?
6-foot cedar privacy replacing original 4-foot chain link. That's the Countryside story. Original chain link from the 1960s-70s is being replaced block by block. Cedar privacy is the most popular upgrade, though vinyl is gaining ground with homeowners who don't want to stain every few years on a shaded lot.
Can I do something creative like horizontal slat or corrugated metal in Mission?
Yes. Mission's eclectic, individually-built older homes invite designs you rarely see on a newer suburban block — we've installed horizontal wood slats, mixed cedar-and-metal fences, and corrugated-metal privacy screens here. The look is your call; our job is to build it to hold: 36-inch post depth and wind-rated panel construction, so a creative design lasts as long as a standard one.
How does fence installation differ in Mission vs. neighboring Overland Park?
Significantly. Mission is older homes on smaller lots under a heavy mature-tree canopy — Overland Park is newer homes on bigger lots. Mission installs are more repair-and-replace (older fences failing), more attentive to tree roots in the post holes, and more about threading a fence onto a half-fenced, drifted property line. Overland Park installs are typically new-lot jobs with more linear footage and premium material specs.

Pricing

What does a typical Mission cedar privacy fence cost?
A 6-foot cedar privacy fence in Mission runs $25 to $34 per linear foot installed. Mission backyards tend to be smaller than Overland Park or Olathe — often 80 to 150 linear feet — putting most full-backyard jobs in the $2,000 to $5,100 range. Vinyl privacy in Mission runs $32 to $42 per linear foot. Creative materials (horizontal slats, mixed metal) are quoted by project. Every Mission estimate is free and itemized.
Why are Mission fences sometimes cheaper than Overland Park?
Smaller lots mean less total linear footage — a typical Mission backyard might run 100 feet against an Overland Park install running 200+. Per-foot pricing is comparable for cedar; the total project cost often lands lower simply because the yard is smaller. Mixed-fence installs, where we only replace the one or two sides that are actually yours, run lower still.
Do you remove and haul off the old fence?
Yes — old-fence demo and haul-off is a standard line item, priced separately so you can see exactly what it costs. On Mission's mixed-fence lots we only remove the sides that are yours; we never touch the neighbor's fabric without their say-so. The old 4-foot chain link comes out, the new 6-foot cedar goes in on fresh 36-inch posts, and the site is left clean.

Ready when you are

Get a free estimate — we usually respond the same day.

Call (913) 286-1091