Pleasant Hill cedar grays out fast without a stain cycle, and posts set shallow in expanding clay with open eastern wind exposure take down a fence inside three winters. RKC Wood Care Pros installs cedar, pressure-treated pine, and composite at $20 to $58 per linear foot â 36-inch posts in wet-poured concrete, first stain coat at 30 days, applied by the same crew that built the fence.
THE CASE FOR A CEDAR OR PINE FENCE HERE
Pleasant Hill cedar grays out fast without a stain cycle, and posts set shallow in expanding clay with eastern wind exposure take down a fence inside three winters. We address both: 36-inch posts in wet-poured concrete, first stain coat at 30 days, re-coat schedule logged on our customer record.
Cedar runs $25 to $35 per linear foot at 15-to-25-year life on a 2-year stain cycle. Pressure-treated pine runs $20 to $28 at 10-to-15 years on a 3-year cycle. Composite runs $40 to $58 with no staining and a 25-year manufacturer warranty. We walk the math against your ownership horizon at the estimate.
A Pleasant Meadows backyard and a Country Ridge acreage run aren't the same wood fence. On the estate lots we spec pressure-treated pine for the long perimeter runs where cedar's cost adds up fast; in the subdivisions cedar privacy is the standard. We match the wood and the profile to the lot before we quote a foot of it.
Cheap finish nails work loose with every freeze-thaw cycle and the picket starts rattling within two seasons. We use galvanized ring-shank fasteners on every cedar install. Small detail, real difference five winters in.
WHAT THE GROUND DOES TO WOOD
Cedar is the default in Pleasant Hill â natural rot and insect resistance, 15-to-25-year life, takes earth-tone stain cleanly. Pressure-treated pine costs 15-to-20% less per linear foot and runs 10-to-15 years. Composite (Trex Seclusions, TimberTech) costs 40-to-60% more upfront, needs zero staining, and carries a 25-year warranty.
Wood fences fail at the posts before the panels. Pleasant Hill's expanding clay with eastern wind exposure walks a shallow post out of plumb in the first freeze-thaw cycle, and KC logs 80+ of those a year. Every post we set goes 36 inches deep in wet-poured concrete with bell-bottom footings and drainage gravel.
Cedar grays early because the stain coat wore off, not because the wood failed. We handle staining in-house â same crew who built your fence, back-brushing the coat. First cedar coat waits 30 days post-install; pressure-treated waits 90 days for the treatment chemistry to cure.
The full spec behind how we build a wood fence — species, grades, fasteners, and the 36-inch post standard — lives on our Kansas City wood fence installation page. This page is the Pleasant Hill version of it.
THE WOOD MENU
The volume wood fence across Pleasant Hill
Dog-ear, board-on-board, or scalloped-top picket profiles. Cedar's natural oils resist rot and insects without chemical treatment, and the tight grain takes earth-tone stains evenly. The volume wood build across Pleasant Hill — the profile most homeowners here picture when they picture a cedar fence.
"Good neighbor" spec — both sides finished
Alternating pickets on each side of the rail so both you and your neighbor see the finished face. The shadow-box gap also lets wind pass through the panel instead of sailing it, which reduces load on the posts during Pleasant Hill's gust events. The go-to when you want both you and the neighbor looking at a finished face, and it lets wind pass through instead of sailing the panel.
Budget-aware option, 15–20% under cedar
Southern yellow pine, kiln-dried after treatment, chemically infused against rot and insects. Right choice for side-yard runs in Sunset Hills, utility enclosures, and budget-first installs where the fence isn't the curb-appeal centerpiece. First stain coat waits 90 days for the treatment chemistry to fully cure out before the stain can penetrate.
Zero-stain schedule · manufacturer-backed
Recycled wood-polymer panels that read as stained cedar at ten paces and never take a stain coat. Upfront cost runs 40 to 60% above cedar, but the 25-year maintenance math makes composite the long-hold choice for Pleasant Hill homeowners planning a 10+ year ownership window or running a rental property where stain cycles don't happen on schedule.
PLEASANT HILL WOOD FENCE PRICING
$25–35
per linear foot installed
Board-on-board or dog-ear. Most-requested Pleasant Hill wood install.
$28–38
per linear foot installed
Both-sides-finished. The "good neighbor" build when you want a clean face on both sides of the line.
$20–28
per linear foot installed
15–20% below cedar. Common for side-yard and utility runs across Pleasant Hill.
Gates, old-fence removal, and grade or slope adjustments are itemized separately on every Pleasant Hill estimate — call (913) 286-1091 or request an on-site walkthrough.
HOW THE WOOD FENCE GOES UP
We walk your Pleasant Hill lot with you, measure the run, check for buried utility pins, and confirm where the fence line sits against the property boundary. Every estimate is free, itemized, and written — linear feet, gates, material, concrete, cleanup, first stain coat. No verbal quotes, no change-order surprises.
With the wood chosen, we mark the run, call the 811 locate, and stage the cedar or pine so it acclimates on site before it goes up. We settle the profile here too — dog-ear, board-on-board, or scalloped picket — because the profile changes the picket count and the price, and we would rather lock that before post day than mid-build.
Typical Pleasant Hill install runs 1 to 3 days depending on linear footage. Posts go 36 inches into wet-poured concrete, bell-bottomed so the clay cannot heave them, with drainage gravel at every base. Then the framework: rails, then pickets fastened with galvanized ring-shank nails that will not work loose the way smooth nails do. Panels go on after footings cure — usually 24 to 48 hours, longer in cold or wet weather.
Cedar holds too much moisture on day one for stain to soak in. We schedule the first coat 30 days post-install (90 days for pressure-treated pine while the treatment cures). Semi-transparent penetrating stain, back-brushed by the same Kansas City fence contractor who built the fence. We keep records on every Pleasant Hill install and call when the 2-year re-coat comes due.
RECENT PLEASANT HILL INSTALLS
REVIEWS
4.9 ★ · 85 Google reviews
Every review is on our Google Business Profile — read them there, unedited.
Read all 85 reviews on GoogleCEDAR, PINE & COMPOSITE — ANSWERED
IF WOOD ISN'T THE ANSWER
UV-stabilized co-extruded vinyl with aluminum-insert rails — the low-maintenance privacy option gaining ground in Pleasant Hill's newer subdivisions.
Explore Vinyl Fence in Pleasant Hill →Galvanized and vinyl-coated mesh — the cheapest durable containment for the larger acreage lots and utility runs east of town.
Explore Chain Link Fence in Pleasant Hill →When the decision is about privacy performance rather than one material — cedar, vinyl, and composite compared side by side.
Explore Privacy Fence in Pleasant Hill →When a wood fence tips past repair — rotted posts, a wind-snapped run — we rebuild it rather than patch a fence that is already gone.
Fence Repair in Pleasant Hill →The reason a wood fence is worth it: we come back and stain the cedar in-house, first coat at 30 days, so it never hits the gray phase.
Fence Staining in Pleasant Hill →A matching cedar or wood gate hung on a 36-inch post, with hardware rated above the gate weight so it never drags the picket line.
Gate Installation in Pleasant Hill →Need the full Pleasant Hill fence overview? Visit the Pleasant Hill fence installation hub.
Ready when you are
